TRM - Torch River Manufacturing Back to Homepage   Boat Docks New Products Ordering
TRM - Torch River Manufacturing

**Notice: We are out of room!  We are holding production of all Torch River Manufacturing

products until we move in to our new location in Spring 2014**

 

ATV Risers

* No More Broken Back Windows

* No More Dented Boxes

* Secure Your Loads

 

* Removable Ramps

* Zero Maintenance Aluminum

 

 

Can you close your truck's tailgate with your quad in the box?

If not ... you need an ATV Riser!

 

If you haul your ATV in the back of your short box truck, you were generally forced to leave your tail gate down exposing it to rock chips and road debris.  As well you weren't able

to properly secure your load inside the box.  Not anymore!  Our all aluminum risers will raise the front of your ATV up enough to give you the clearance

 at the tailgate you need.  Your quad's front wheels sit in the checker plate wheel wells, securing the quad from rolling, and will eliminate any box or rear  window damage.  We use

T6061-T6 Structural Heavy wall, Marine Grade Aluminum to give our risers the looks, ruggedness and  durability you expect, yet it still weighs around 40 lbs!  Our products will exceed your

expectations even in the toughest conditions!

    • 100% Welded Construction!  No bolts! - Your riser is put through an enormous amount of stress every time you load, carry or offload your quad.  A bolted riser, although much cheaper to produce, may tend to warp and give after several uses, leaving you a less than solid product.
  •          Heavy Wall Structural Aluminum tubing! If built too light, aluminum has a tendency to fatigue & crack when subjected to repetitive stress.  There are certainly lighter risers available on the market, but we build our products to last a lifetime, not just the length of our warranty!

      ?         All worked preformed by fully certified Journeyman Welders!  Fabricating is what we do!  Be sure you know who built yours!

      ML:NAMESPACE PREFIX = O />

    •  

                 

       

      Standard on all our Risers:

        • Pull your trailer again without worry of damaging your tailgate or trailer!
        • No more dented boxes or broken back windows!
        • No more paint chipped or road-rashed tail gates
        • Gain 10 - 24 cubic feet of storage space
        • Secure your cargo in your box
        • Zero maintenance Marine Grade Structural Aluminum
        • Removable ramps for easy storage
        • Welded corner gussets help make it rock solid!
        • Built in tie down points
        • Fully Welded Construction!!
        • Solid, Secure and Worry Free!

      All work is performed by certified Journeyman Welders!

       

      ATV Risers

      • Comes standard at 49.5" wide to accommodate most stock ATV's
      • Wider model available at 53" to accept the wider aftermarket tires
      • Model avaiable for mid size trucks
      • Gain 10 -  18 Cubic feet of storage space!!

      $399 +tax

      UTV Risers

      • Comes standard at 62" Wide

       

      • Gain 14-24 cubic feet of storage space!! 

      $445 +tax

       

      Torch River Manufacturing

      uses the latest in Lincoln Electric

      aluminum welding technology.

       

      "Make the most out of your truck box...order your ATV Riser today!"


      1978 Chevy Shortbox with a 2005 Bombardier 400

       

         Dealer Inquirys Welcome!  

      For more information email us HERE today!

       




       

       

       

       

       

      Torch River Manufacturing
      Nipawin, SK Canada

      Email us here!

      ? 2014 Torch River Manufacturing

      Torch River Manufacturing is a division of Precision Pressure Welding Inc.